CCIE - Internetwork Expert's Online Community

I have set up all devices but I have an errror message about flash memory on SW1 and SW3.

I have HP DL580 G2 with 8GB mem and 4    3.0ghz xeon CPUs.

Here is the snapshot of the message.

Rack1SW1#sh ver

Cisco IOS Software, 3600 Software (C3640-IK9O3S-M), Version 12.4(21), RELEASE SO

FTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2008 by Cisco Systems, Inc.

Compiled Thu 10-Jul-08 04:59 by prod_rel_team

ROM: ROMMON Emulation Microcode

ROM: 3600 Software (C3640-IK9O3S-M), Version 12.4(21), RELEASE SOFTWARE (fc1)

Rack1SW1 uptime is 1 hour, 11 minutes

System returned to ROM by unknown reload cause - suspect boot_data[BOOT_COUNT] 0

x0, BOOT_COUNT 0, BOOTDATA 19

System image file is "tftp://255.255.255.255/unknown"

== message omitted ==

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 3640 (R4700) processor (revision 0xFF) with 249856K/12288K bytes of memory

.

Processor board ID 00000000

R4700 CPU at 100MHz, Implementation 33, Rev 1.2

16 FastEthernet interfaces

DRAM configuration is 64 bits wide with parity enabled.

125K bytes of NVRAM.

8192K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Rack1SW1#vlan data

Rack1SW1(vlan)#vtp domain CISCO-A

Domain name already set to CISCO-A .

Rack1SW1(vlan)#vtp server

Setting device to VTP SERVER mode.

% not enough space on flash to store vlan database. trying squeeze...First creat

e squeeze log by erasing the entire device

% error squeezing flash - (Missing or corrupted log)

Rack1SW1(vlan)#exit

In CLIENT state, no apply attempted.

Exiting....

Rack1SW1#vlan data

Rack1SW1(vlan)#vlan 33

VLAN 33 added:

    Name: VLAN0033

Rack1SW1(vlan)#exit

In CLIENT state, no apply attempted.

Exiting....

Rack1SW1#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Rack1SW1(config)#int f1/3

Rack1SW1(config-if)#sw acc vl 33

%Access VLAN 33 does not exist. Please add it to vlan database

Rack1SW1(config-if)#

try del vlan.dat and start over.

here is the message that I got when I tried to delete vlan.dat on flash

Rack1SW1#dir

Directory of flash:/

No files in directory

8388604 bytes total (0 bytes free)

Rack1SW1#del flash:/vlan.dat

Delete filename [vlan.dat]?

Delete flash:/vlan.dat? [confirm]

%Error deleting flash:/vlan.dat (No such file or directory)

Rack1SW1#

I fixed problem.

Thanks

your problem is "

Rack1SW1(vlan)#vtp server

Setting device to VTP SERVER mode.

% not enough space on flash to store vlan database. trying squeeze...First creat

e squeeze log by erasing the entire device

"

i have meet , i delete flash/vlan.dat  and use command squese to free the flash size.

sorry i forget

can you try use command "format flash", maybe it's win,